搜索 - E2E™ 设计支持

搜索提示

找到 13,433 个结果查看问题帖子排序依据

CC23XX-REPORTS: CC2745 demo (例如：car_node)在线仿真提示SCFG CRC32校验错误

free chen

已解决
Part Number: CC23XX-REPORTS Other Parts Discussed in Thread: CC2745R10-Q1 环境 SWD Test Connection 执行正常 %ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity [Result] -----[Print the board config pathname(s)]-------------------------…
- 已回答
- 9 个月前
- Bluetooth
- 蓝牙论坛

RE: [参考译文] DRV5055-5057EVM：在 GUI 中输出伏特数据

admin

已解决
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。尊敬的 Kailun：我最初假设通过拆焊来移除传感器、但现在看到客户切割了 EVM 板以移除其他传感器。我们不建议以这种方式修改 EVM 板。很难判断切割过程中是否有任何元件损坏、或者电路板上的布线或平面现在是否已损坏或短路。我建议客户使用新的 DRV5055-5057EVM 进行评估、或者他们可以查看 HALL-ADAPTER-EVM、它包含一个采用 TO-92封装的分线板…
- 2 年多前
- 传感器（参考译文帖）
- 传感器（参考译文帖）(Read Only)

RE: [参考译文] TMCS1126：30kW、2‑相交错同步降压 (800–1000V 至 650V) 的电流检测方法选择

admin

已解决
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。你好 Prabhu、我支持 TMCS 产品、因此我对这些器件更了解。 TMCS 器件通常更易于实施、其中 Rshunt 成本可能是成本较低的解决方案。问题在于您需要多高的精度。 [引用 userid=“686285“ url=“~/support/sensors-group/sensors/f/sensors-forum/1643819/tmcs1126-current-sensing…
- 4 个月前
- 传感器（参考译文帖）
- 传感器（参考译文帖）(Read Only)
RE: CC3235S: Does the CC3235S chip support DFS in the 5150-5350 MHz frequency band? If it does, please provide the firmware that supports DFS.

Taylor

Hi, 1. We didn't certify SRRC so there isn't a FW that supports this testing technically, but I recommend using the latest FW available for this device. SRRC is very similar to ETSI so its very likely they can pass, there may be certain channels where…
- 11 个月前
- Wi-Fi
- Wi-Fi 论坛

[参考译文] USB-TO-GPIO2：如何触发 USB-TO-GPIO (2006)适配器[TUSB3210]的 USB 功能复位？

admin

已解决
Other Parts Discussed in Thread: UCD90120A 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1425784/usb-to-gpio2-how-to-trigger-usb-function-reset-for…
- 已回答
- 1 年多前
- 电源管理（参考译文帖）
- 电源管理（参考译文帖）(Read Only)

RE: TPS65987D: 搭配BQ25723的应用问题

Xavier

已解决
Thank you for your reply, here is an additional description of my problem: 1, the plug in question 2 is the PD adapter, i.e. the USB-C cable plug. 2, BQ25723 and TPS65987 chip on the same board. 3, "PD adapter" refers to the USB-C cable plug (which is connected…
- 2 年多前
- 电源管理
- 电源管理论坛
DLP4710EVM-LC: I connected the power, then connected the USB. D57 is constantly on. After I pressed W21, D57 -> D56 flashes -> D57, but the projector still does not turn on. T

shuang yang

Part Number: DLP4710EVM-LC EVM Status: Connected, Powered Off Using a multimeter to measure, when SW21 is pressed, the 1.8V and 1.1V voltages reach a reasonable range, but they immediately drop to 0.
- 3 个月前
- 仿真、硬件和系统设计工具
- 仿真、硬件和系统设计工具论坛

RE: AWR2944EVM: advanced_chirp_DDMA or advanced_chirp_advanced_frame_DDMA Configuring fast/slow chirp and stepped frequency is invalid

Wang Mei

已解决
"Hi there! I have reconfigured the waveform according to your modification suggestions and flashed the adapted application image. Now I can collect data normally, but there is a significant discrepancy between the detection results and our preset step…
- 1 个月前
- 传感器
- 传感器论坛

RE: TPS53676EVM-084: What is the voltage of the PMBus interface (J8) on the TPS53676EVM?

Links

已解决
From the user guide Using the TPS53676 step-down controller EVM A 5-V to 3.3-V LDO (TLV75733) generates the 3.3-V controller bias voltage, and also supplies auxiliary circuits and LEDs on the EVM
- 3 个月前
- 电源管理
- 电源管理论坛

RE: TDA4VM: tda4ve edp 输出

Shine

已解决
请看下面工程师的回复。 Please find attached log from the EVM, with DP -> HDMI adapter enabled. 0027.teraterm.log I also used now SDK8.4 release, and can see it working.. Is there a way to confirm that it is active DP to HDMI convertor?
- 3 年多前
- 处理器
- 处理器论坛

未找到您搜索的内容？发布一个新问题吧。

发布新问题