Other Parts Discussed in Thread: SN74AVC32T245 在 AM335x EVM LCD A Board Schematic (Rev 1.1A)中，LCD电平转换用的是SN74AVC32T245。/OE电路如图1.
问题：图1的电路能满足SN74AVC32T245手册中上电，掉电要求（图2）吗？图3是推荐应用，/OE是不是要接个GPIO呢？
图1
图2
图3
Other Parts Discussed in Thread: USB-REDRIVER-EVM 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/609048/usb-redriver-evm-dual-footprint-a-plug-and-a-receptacle-function…
Part Number: MMWCAS-RF-EVM Other Parts Discussed in Thread: AWR1642BOOST , DCA1000EVM , AWR1642 , IWR6843 , IWR6843ISK , MMWAVEICBOOST I would like to assemble a millimeter-wave radar transceiver system with the goal of collecting micro-Doppler signature signals…
Part Number: TPS25730 Other Parts Discussed in Thread: TPS25751 Regarding the power supply negotiation issue, the following questions exist:
1. When a charging adapter supporting the PD protocol is input, the TPS25730 should be able to recognize it. After…
Part Number: TPS2663 Other Parts Discussed in Thread: BQ25690
Hello, we aim to implement a hardware circuit system architecture similar to the block diagram below.
Using a 24 V bus, with an input power supply of 24 V/1.5 A. This system incorporates a lithium…
Based on this message, you are trying to flash firmware onto the UCD3138 via JTAG and Code Composer Studio (CCS). This requires the XDS110 debugger , as shown in the error message's title.
The USB-TO-GPIO2 is a PMBus/I2C adapter, not a JTAG adapter. The…
