Part Number: TMS320C6678 加载Gel文件后,DDR3的测试失败,导致初始化失败: C66xx_0: GEL Output: PLL and DDR Initialization failed ...
GEL文件加载后输出如下:
C66xx_0: GEL Output: DSP core #0 C66xx_0: GEL Output: C6678L GEL file Ver is 2.00500011 C66xx_0: GEL Output: Global Default Setup…
Part Number: TMS320C6678 srio速率为3.12g,4xlanes,通信最长半小时,dsp刘接收不到fpga的门铃了,fpga那边的门铃计数比dsp多一次,说明fpga.发了,dsp没有收到门铃,出现这种情况时有时fpga端的reay信号为高,有时为低,也就是说有时建链已经断开,有时还没断开,但是如果建链没断开的情况下再发一次数据申请,建链就断开了然后再也恢复不了了。
Other Parts Discussed in Thread: SYSBIOS , FFTLIB 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1222863/tms320c6678-the-omp_config-cfg-file-reports-an-error 器件型号: TMS…
Part Number: TMS320C6678 Other Parts Discussed in Thread: UCD9222 工程师您好!
我们参考的是TMDXEVM6678L_EVM,其中的FPGA要替换掉;
DSP的电源UCD9222中的VID2一组EVM是连到FPGA,并产生VCC1V0;那我们不想要FPGA来控电源了,那这一路电源的要怎么处理,VID2要怎么处理?
感谢!
Other Parts Discussed in Thread: TMS320C6678 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1200896/tms320c6678-evaluation-module-tmdsevm6678-obsolete 器件型号: TMS320C66…
Part Number: TMS320C6678 软件仿真调试过程中报错:Can't find a source file at "/oe/bld/build-CORTEX_1/arago-tmp-external-linaro-toolchain/work/c667x_evm-linux-gnueabi/openmp-rtos/2_06_02_01-r0.tisdk-int8/git/src/ti/runtime/openmp/src/tomp_util.h" Locate…