Other Parts Discussed in Thread: TMS320F2811 各位老师您们好!最近我新做了一款电机驱动,主芯片是TMS320f2811,在做硬件调试时,把所有电源都焊接上,各种电源15V,5V,3.3,1.8都是很稳定的,但是当把DSP焊接上以后(整个电路板只焊了最小系统),15V和5V的电源会很烫,5V的负载只有500欧,3.3V和1.8V不烫板上就一个最小系统,各电压值稳定,为什么会有近0.2A的电流呢?这个功耗也太大了,是不是最小系统哪里出错了?当我再次把DSP焊下来…
Other Parts Discussed in Thread: TMS320F2811 Hi, I want to ask a simple question, the datasheet regarding ADC module of TMS320F2811, it say that the data is 4095 if input is >3V. So I want to ask if I can input 3.3V voltage. My ADC low referece is 0..…
Other Parts Discussed in Thread: TMS320F2811 , C2000WARE 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1256594/ccs-error-10234-d…
Other Parts Discussed in Thread: TMS320F2811 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/997755/tms320f28377d-q1-signal-applied…
Other Parts Discussed in Thread: UNIFLASH , TMS320F2811 , CONTROLSUITE 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers…