Other Parts Discussed in Thread: C2000WARE , TMS320F28377S 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1320725/tms320f28377s-securing…
Part Number: TMS320F28377S
At present, I plan to use the eQEP routine to implement it on TI's 28377s development board, and connect it to the TTL encoder instead of simulating the AB phase of the ePWM input encoder in the routine. In addition, there is…
Part Number: TMS320F28377S Other Parts Discussed in Thread: C2000WARE 参考TI的官方移植的freeRTOS 库, 发现一个问题,定时器1 的中断执行任务时机切换的函数,如下图。 但实际上这个输入参数始终为pdFALSE, 相当于这个函数没有执行有效的内容? 这么设计的含义的是什么,为什么要添加这个函数?
Part Number: TMS320F28377S 在我的应用中,我需要频繁启动和停止epwm,在其他配置不变的情况下,目前是通过将TBCLKSYNC设置为1启动pwm,通过将TBCLKSYNC设置为0停止pwm的输出。
但我发现将TBCLKSYNC设置为0,停止pwm后,引脚输出的状态为高电平或者低电平都有,可能取决于停止的时候输出引脚本身的状态。请问如果想在pwm停止的情况下,引脚的输出为低,有什么方法,谢谢。
Other Parts Discussed in Thread: ADS8586S , TMS320F28377S 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1316836/can-the-ads8586s-be-connected-to-the-tms320f28377s-upp…
Other Parts Discussed in Thread: TMS320F28377S , TMS320F28374S , UNIFLASH 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1193237/tms320f28377s…
Other Parts Discussed in Thread: C2000WARE 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1317905/tms320f28377s-pcmc-using-cmpss…