Hi，
1. For DRV8873, in PWM mode, mcu controller drv8873 by nSLEEP, DISABLE, IN1 and IN2 pins, operat, how to set the input can operate drv8873 from forward to slow decay(or fast decay)? I'm not sure my operate is right, because when motor from full speed…
Other Parts Discussed in Thread: BQ24259 , BQ25628 , BQ24296M 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1367468/bq24259-ic-getting-exceptionally…
Other Parts Discussed in Thread: UCC23513 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1467294/ucc23513-output-current-and-gate-resistance-calc 器件型号…
您好，请参考下面内容
The input current register is clamped to the lower of the value written to the I2C register or the value per the ILIM_HIZ resistor if EN_ILIM bit = 1. To write a higher value to the input current limit register, set EN_ILIM=0. The ILIM from…
您好，请参考下内容
The input current register is clamped to the lower of the value written to the I2C register or the value per the ILIM_HIZ resistor if EN_ILIM bit = 1. To write a higher value to the input current limit register, set EN_ILIM=0. The ILIM from ICO…
