Other Parts Discussed in Thread: LM5576 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1456916/lm5576-current-limit-isn-t-into-cycle-by-cycle-current…
Part Number: TPS1HTC30-Q1 Hi,
I'm testing this smart high-side switch.
This IC max current is 6A.
Vs pin = 24~26V
EN = 5V
ILIM = 24Kohm to GND.
Theoretically the current limit should be 4.16A
when I put the load on the Vout, setting the current over…
Part Number: TPS61022 HI TI
我在看TPS61022的SPEC，标题上写的是8A的BOOST，我以为意思是可以输出8A的电流。
实际上spec中 94.7% Efficiency at V IN = 3.6 V, V OUT = 5 V and I OUT = 3 A 输出电流是3A。没有到8A
但是我看见 8A Valley switching current limit，这个是什么意义？我不太明白 。
这是指输入电流最大8A吗？
Part Number: TMS320F280049C
I'm conducting some research on the Current Programmed Mode control, but i'm confused of the ramp generator submodule.
The range of 280049C DAC value is 0 ~ 4095. The SYSCLK of 280049C is 100MHz, and without any Clock…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 /*--------------------------DC Current Limit Code Snippet depend on SpeedRPM--------------------------*/
if (DC_Bara_Current_value_mA > DC_BARA_Current_max_limit)
{
if (limitHizAtamaSwitch…
Part Number: TCAN1463-Q1 Hi TI Experts,
I'm supporting customer CATL who is developing a 12V Battery Management System (BMS) and encountering a critical issue during BCI testing with the TCAN1463-Q1 CAN transceiver. This is blocking their validation timeline…
Other Parts Discussed in Thread: TPS1685 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1629154/tps1685-tps16850vmar-increased-current-limit-up-to…
