您好, It is not unknown that LEDs draw current. I see that there's a 100Ohm resistor in the LED path, see below for the EVM schematic. The 100 Ohm might be current limiters, but could be dissipating power.
What can be done is increase the Deadband to…
Other Parts Discussed in Thread: TPS2HB35-Q1 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1575130/tps2hb35-q1-current-limit-accuracy 器件型号： TPS2HB35…
您好，请参考下面内容
Q6 is the pre-charge FET. This FET is controlled by the PRECHG pin of the BQ78350, and it is connected parallel to the CHG and DSG FETs and in series with a 1kOhm resistor (R48).
In order to limit inrush current, the BQ78350 will enable Q6…
Other Parts Discussed in Thread: TPS628502 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1560958/tps628502-short-circuit-current-limit 器件型号： TPS628…
Other Parts Discussed in Thread: BQ25756 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1371710/bq25756-how-to-enable-pre-charge-current-limit-termination…
Other Parts Discussed in Thread: TPS61299 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1478197/tps61299-tps61299-current-limit 器件型号： TPS61299 工具与软件…
