Hi Links,
1.When the battery is not present, the input current of BQ25792 seems to be limited to below 1A. Is there any way to lift this restriction?
Is the device reporting a BATOVP here? What is your ILIM_HIZ resistor value? What is your IINDPM…
Other Parts Discussed in Thread: DRV8876-Q1 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1586782/drv8876-q1-selection-of-proper-resistor-value-to-set-current…
Hello，
Internal PWM output of DRV8813 is 50kHZ , that means when the input remains unchanged, once the output reaches the current limit value set by Rsense, it will automatically generate 50k PWM to limit the current.
For the duty, it is not fixed, and…
Part Number: LM5069 I would like to ask you some questions about LM5069，
1.If the LM5069 power supply and ground connection are reversed, will the chip be damaged?
2.As for the power limiting function, the VSNS voltage of the chip is recommended to be…
1. Transient protection is missing. We recommend using TVS diode at the input and Schottky diode at the output to help against transients which are generated in events like hot-plug or short circuit and can cross the absolute maximum of the device resulting…
