Part Number: TPS1HTC30-Q1 Hi,
I'm testing this smart high-side switch.
This IC max current is 6A.
Vs pin = 24~26V
EN = 5V
ILIM = 24Kohm to GND.
Theoretically the current limit should be 4.16A
when I put the load on the Vout, setting the current over…
Part Number: TPS61022 HI TI
我在看TPS61022的SPEC，标题上写的是8A的BOOST，我以为意思是可以输出8A的电流。
实际上spec中 94.7% Efficiency at V IN = 3.6 V, V OUT = 5 V and I OUT = 3 A 输出电流是3A。没有到8A
但是我看见 8A Valley switching current limit，这个是什么意义？我不太明白 。
这是指输入电流最大8A吗？
Part Number: TMS320F280049C
I'm conducting some research on the Current Programmed Mode control, but i'm confused of the ramp generator submodule.
The range of 280049C DAC value is 0 ~ 4095. The SYSCLK of 280049C is 100MHz, and without any Clock…
Part Number: TCAN1463-Q1 Hi TI Experts,
I'm supporting customer CATL who is developing a 12V Battery Management System (BMS) and encountering a critical issue during BCI testing with the TCAN1463-Q1 CAN transceiver. This is blocking their validation timeline…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 /*--------------------------DC Current Limit Code Snippet depend on SpeedRPM--------------------------*/
if (DC_Bara_Current_value_mA > DC_BARA_Current_max_limit)
{
if (limitHizAtamaSwitch…
Other Parts Discussed in Thread: TPS1685 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1629154/tps1685-tps16850vmar-increased-current-limit-up-to…
Part Number: MSP430FR2355
Hello TI support team,
I am using an MSP430FR2355 FRAM MCU together with IAR Embedded Workbench for MSP430.
My Requirement
I need to reserve the FRAM address range 0xF800 ~ 0xFFFF (2048 bytes) as the bootloader storage…
Current peaks through the internal bootstrap diode are expected during two main conditions. The first of those being startup when the first LO pulses occur to charge the bootstrap capacitor. The second being a smaller pulse during steady state conditions…
