Other Parts Discussed in Thread: LM3466 Hi all,
I'm using LM3466 for current balancing, and I try to add the current limitation circuit as below circuit, but now the current limitation function cannot work.
Circuit Diagram 1:
I select the R4 (48K…
Other Parts Discussed in Thread: TPS54620 Does the minimum of High-side switch current limit and Low-side switch sourcing current limit decide the output inductor peak current?
For example,in TPS54620 datasheet, High-side switch current limit and Low-side…
Louis Lo 说： 1.Which register we should follow to set ?
Input current can be set in either register 0x3F or the external resistor.
Louis Lo 说： 2.When we disable IDPM the charger input current will follow the external current limit right ?
No, The device…
The BQ25690 plus the current limit switch might work here. In forward mode, the BQ25690 charges the battery from power at VBUS. When VBUS drops below a certain threshold, the BQ25690 backup mode feature can be armed to automatically operate in reverse…
#define TTPLPFC_GI_PI_KP (float) 0.3 #define TTPLPFC_GI_PI_KI (float) 0.03 #define TTPLPFC_GV_PI_KP (float) 0.6 #define TTPLPFC_GV_PI_KI (float) 0.0001
I am currently unable to identify the root cause of driver loss when the input voltage increases during…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您好、Chris、
再次感谢您的帮助。
不同状态下 BQ 寄存器的内容：
未刷写 EEPROM：
Charge Voltage Limit: 1.504 V
Charge Current Limit: 6.400 A
Termination Current Limit : 6.600 A
使用刷写的 EEPROM（未插入 usb-c）：
Charge Voltage Limit…
1.Inductance parameters The saturation current capability of an inductor directly affects the upper limit of the output current. If the inductor specifications are insufficient (such as low saturation current), it may result in limited output current or…
