请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您好！ 尝试以下设置。
[Charge Cfg(Charge Control)]
Chg Voltage = 9000 ; Unchanged
Taper Current = 100 ; Was 50
Taper Voltage = 20 ; Was 50
Current Taper Window = 20 ; Was 10…
Other Parts Discussed in Thread: TPS564252 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1432111/tps564252-pg-pin-current-limit 器件型号： TPS564252 工具与软件…
Other Parts Discussed in Thread: BQ25616 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1540770/bq25616-does-leaving-the-d-d--pins-as-nc-default-to…
Other Parts Discussed in Thread: TPS2042B 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1510467/lm3526-regarding-the-inrush-current-limit 器件型号： LM3…
Hi,
Could I be provided with two captures, one with SHx, GHx, GLx, and VDRAIN and the other with the input PWM, SHX, and ISEN, when the motor is commanded to begin spinning? I want to check if Vlimit is being exceeded which would be limiting the current…
Other Parts Discussed in Thread: TPS1H200A-Q1 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1509311/tps1h200a-q1-tps1h200a-q1-current-limit-cl-using…
Other Parts Discussed in Thread: LM117 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1537964/tps7a4701-ep-current-limiting-capability 器件型号： TPS7A4701…
I would recommend minimizing the gate drive loop as much as possible to limit ringing from inductance. I can't tell how long the gate drive paths are, but I would analyze if these can be shortened in the next layout revision.
I also wonder if there…
