Part Number: TPS546D24A
This is a three-phase stacked configuration. Test data: 12V input, with each phase outputting 1.2V at 30A. After prolonged operation, the output shuts down automatically; power must be cycled to restore operation, but the fault…
Part Number: TPS546D24A 在读取芯片寄存器功耗换算方式是按照读取到的电压U*电流I+5W作为实际的寄存器功耗值P1，现在有的板子墙上功耗位P2，P2＜P1；P2为21.69W，P1为22W。现在芯片寄存器读取到的功耗是22W，供电电源墙上输入功耗为21.69W，出现了输入功率低于输出功率的问题；（输出功率计算方式为：寄存器读取到的电压值为U，寄存器读取到的电流值为I，输出功耗为U*I+5W，5W为补偿功耗；），现在想问的是输出功耗计算方式是否有问题。
Part Number: TPS546D24A Hi TI experts,
We have one question for Vout_Mode of TPS546D24A(20h), we would like to know how to change the mode and is it related with external pin configurations? or something like firmware or component specificed.
Thanks.
…
Part Number: TPS546D24A E (2452) TPS546: Status: 0x1842 E (2455) TPS546: The voltage regulator is turned off E (2460) TPS546: A communication, memory, logic fault has occurred E (2468) TPS546: TPS546 CML Status: 02 E (2472) TPS546: communication error det…
Part Number: TPS546D24A In our design, it need TPS546D24ARVFR output 67A@0.75V with 2-phase design, and 45A@1.2V with 2-phase design. Would you like to check our design and give us some advice? Just like how to set the right output voltage of 1.2V or 0…
Other Parts Discussed in Thread: TPS546D24A 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1457231/tps546d24a-on-tps546d24a-we-do-not-see-option-to…
Other Parts Discussed in Thread: TPS546D24A 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1554729/tps546d24a-vout-collapses-when-vosns-connected 器件型号…
