Part Number: MMWCAS-DSP-EVM When using the cascaded radar and MMWCAS-DSP-EVM to connect to mmwave studio3.0, the TDAX board cannot be connected, and an error is reported as shown in the picture. The wiring connection is normal, the computer's network port…
Other Parts Discussed in Thread: C2000WARE 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1540020/f29h85x-som-evm-crc-example-has…
这可能与当初EVM设计时,设定的典型值有关。并不是特定的。
下面是我找到的一些信息。
I did not personally design that EVM, but it is not uncommon to have restricted input voltage range. In this particular case, it has to do with the external UVLO set by R4 and R5. The typical start voltage is…
Part Number: AWR2944 6283.Radar_2944 V1.0.PcbDoc.zip 7701.PROC113D_BRD.zip
Our own board has some noisy points.
By comparing the two boards we can see that:the antenna location of our own board is in the middle of the board, while in the AWR2944 EVM…