E2E™ 设计支持
E2E™ 设计支持
  • 用户
  • 站点
  • 搜索
  • 用户
  • E2E™ 中文设计支持 >
  • 论坛
    • 放大器
    • API 解答
    • 音频
    • 时钟和计时
    • 数据转换器
    • DLP® 产品
    • 接口
    • 隔离
    • 逻辑
    • 微控制器
    • 电机驱动器
    • 处理器
    • 电源管理
    • 射频与微波
    • 传感器
    • 站点支持
    • 开关与多路复用器
    • 工具
    • 无线连接
    • 参考译文
    • 存档组
    • 存档论坛
  • 技术文章
    • 模拟
    • 汽车
    • DLP® 技术
    • 嵌入式处理
    • 工业
    • 电源管理
  • TI 培训
  • 快速入门
  • English
  • 更多
  • 取消


搜索提示
找到 1,937 个结果 查看 问题 帖子 排序依据
    Answered
  • IWR6843: 天线的表面镀层处理对天线性能的定量影响。

    Hui Chen
    Hui Chen
    已解决
    Part Number: IWR6843 你好。 spracg5中对PCB微带天线表面镀层的loss影响有这么一段描述,请问此处是否有更加精确的定量研究结果?ENIG处理的loss比镀银处理的loss多多少个dB呢? 谢谢。 Plating affects RF characteristics. Most common plating used in industry, Electroless Nickel-Immersion Gold (ENIG), is not a good choice for…
    • 已回答
    • 4 年多前
    • 传感器
    • 传感器论坛
  • Answered
  • [参考译文] 66AK2H12:执行 setup.sh 错误:shift:can't shift that many

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1422607/66ak2h12-execute-setup-sh-error-shift-can-t-shift-that-many 器件型号: 66AK2H12 工具与软件: 我想升级66AK2H 的 SDK 版本、但在执行 setup…
    • 已回答
    • 1 年多前
    • 处理器(参考译文帖)
    • 处理器(参考译文帖)(Read Only)
  • 66AK2H14: Execute setup.sh error: shift: can't shift that many

    wyman yuan
    wyman yuan
    TI 认为已经解决
    Part Number: 66AK2H14 I want to upgrade the SDK version of 66AK2H, but the following error occurred while executing setup.sh. What is the reason for this? The SDK version is 06.03.00.106 . root@athena-VirtualBox:/home/ym/python-build/TiBuild/SDK# ./setup…
    • 1 年多前
    • 处理器
    • 处理器论坛
  • RE: CDCM6208V1无法输出时钟,ELF管脚电压一直0V。感觉像是锁相环没有工作起来。

    Kailyn Chen
    Kailyn Chen
    您好, 我已收到答复,意思是说如果SEC_REF输入的话,这里的硬件电路需要注意下 ,将R72 和R73 两个电阻去掉,R87 和R89用0ohm电阻,可以参考demo中P16的原理图: www.ti.com/.../scau049a.pdf Has the customer done the proper modifications to the EVM in order to get the SEC_REF to work? As stated in the EVM user guide: …
    • 6 年多前
    • 时钟和时序
    • 时钟和计时论坛
  • Answered
  • RE: [参考译文] Processor-SDK-AM64X:运行 Linux 的 A53加载 M4

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 嗨,Moshen, 您可以尝试通过以下步骤从 Linux 加载 M4应用程序: 1.从 M4的 LED 闪烁示例开始。 通过 CCS 在 M4上构建和运行该项目: MCU_plus_SDK_am64x_08_01_00_36__all\MCU_plus_SDK_am64x_08_01_00_36\examples\drivers\GPIO \GPIO \GPIO _LEGEO_LED_BLINK…
    • 4 年多前
    • 处理器(参考译文帖)
    • 处理器(参考译文帖)(Read Only)
  • Answered
  • [参考译文] TSW1400EVM:为什么 TSW1400 EVM 的限制为10秒?

    admin
    admin
    已解决
    Other Parts Discussed in Thread: DCA1000EVM 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1007349/tsw1400evm-why-tsw1400-evm-has-a-limit-of-10sec 器件型号…
    • 已回答
    • 5 年多前
    • 数据转换器(参考译文帖)
    • 数据转换器(参考译文帖)(Read Only)
  • Answered
  • MSPM0L1306: Can not download flash through Segger J-Link Debug with Keil5 IDE

    fanok
    fanok
    已解决
    Part Number: MSPM0L1306 Other Parts Discussed in Thread: UNIFLASH hi all, my EVM board is MSPM0L1306, At first, i can download the code into the flash and debub with Keil5. but one time I don't know what pin I touched when I used the oscilloscope, may…
    • 已回答
    • 3 年多前
    • 其他微控制器
    • 其他微控制器论坛
  • Answered
  • RE: IWR1642 BOOST 天线角度问题

    Wesley He
    Wesley He
    已解决
    你好, 请参考: e2e.ti.com/.../658632 The IWR1642BOOST EVM has an elevation FOV of about +/- 15 degrees so a total of about 30 degrees (based on 6 dB drop in the gain as compared to bore sight). You can refer to the antenna pattern plot in section 2.6 of the…
    • 7 年多前
    • 存档论坛
    • 其它模拟产品 (Read-Only)
  • RE: AM3359 ICE V2 上的旋转开关是干啥用的

    Nancy Wang
    Nancy Wang
    Rotary Encoded Switch The EVM has a rotary switch that allows a slave address to be selected. This switch selects a 4bit (hex) value and a I2C converter allows this encoded value to be read by the AM335x through the I2C0 port. 关于开发板的硬件部分看这个文档。 processors…
    • 7 年多前
    • 处理器
    • 处理器论坛
  • Answered
  • RE: [参考译文] AM2434:icssg lwip 演示在一个 UDP 发送周期内、进入 UDP 发送时分配的 pbuf 地址在 UDP 发送结束后的 SYS_ARCH_PROTECT 之后发生了更改

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 尊敬的 Shaunak Deshpande: (__LW_AT__发现原因是另一台)PC 与 AM243(客户主板基本 AM2434-EVM)连接的是一直发送 UDP 包(类型是 PBUF_POOL )至 AM24、因此 我之前的说明是不可更正的。 Unknown 说: 缓冲器 传入 netconn_send() 是 PBUF_RAM 作为 netbuf_alloc()点, 但是…
    • 3 年多前
    • 基于 Arm 的微控制器(参考译文帖)
    • 基于 Arm 的微控制器(参考译文帖)(Read Only)
<>

未找到您搜索的内容?发布一个新问题吧。

  • 发布新问题