工程师已有回复,请查看。
The UB954-Q1 EVM has two Samtec MIPI connectors. Which one are they using? I assume they have an E1 version of the SK-AM62A-LP which has a Samtec MIPI connector. Is that right?
Would you mind asking them to provide a picture of their complete…
Part Number: AM6422
These resistor is used for boot mode config.
FAE suggest us increase the R to 1K and refer EVM or SK schematics. If not increased the R, failures that can happen.
We use a buffer AVC8T245 which has output impedance (as below photo…
Part Number: AM6526 Dear TI Support Team,
I’m firmware engineer from ABB AUMA 2WCTW team. We are currently using your TI ETS test board for testing. Recently, the board has failed to work properly, so I’m writing to ask for your technical support.…
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 是的、根据用户指南、我使用 CSS v12加载并运行。 我看到"mmWave has been configured for MRR"、"Sensor will stimth"消息符合预期、而没有错误消息。 想法?
此外、为了详细了解此开发环境如何工作、为什么 ccsdebug.bin 在功能模式下与 EVM 配合使用、而不仅仅是在调试/开发模式下使用…
Part Number: PROCESSOR-SDK-AM62A Hi export,
我按照以下步骤下载编译Processor sdk Linux for AM62Ax,但是yocto编译出错,无法继续。请帮忙检查一下是什么问题。
参考文档 software-dl.ti.com/.../Overview_Building_the_SDK.html
1)./ti_cgt_armllvm_3.2.0.LTS_linux-x64_installer.bin
2) cd ti-processor-sdk-linux…