Other Parts Discussed in Thread: AM2612 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1622017/am2612…
Other Parts Discussed in Thread: TPS552882-Q1 , TPS55288 , LM51772 , LM51772-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1570469/tps552882-q1-buck…
Part Number: LM5060-Q1 Other Parts Discussed in Thread: TIDA-01168 , LM5060 LM5060.pdf
使用TIDA-01168中的LM5060高边驱动芯片,发现在MOS开启后拉低EN引脚输出侧还是有44V电压(MOS正常打开时输出48V),且此时可以放电,一段时间后造成MOS损坏,大概原因是MOS驱动GS在EN脚拉低后还能输出3V左右电压,此电压达到MOS的开启电压VGSTH导致MOS不完全导通。请帮忙给出解决方法。谢谢!
Other Parts Discussed in Thread: DS90UB941AS-Q1 , DS90UB948-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1625784/ds90ub948-q1-i-would-like-to-ask-if-there-is-a-way…
Other Parts Discussed in Thread: CD4010B-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1512422/cd4010b-q1-request-to-functional-safety-fit-value-and-failure-mode-distribution-gate…
Other Parts Discussed in Thread: DS90UH947-Q1 , DS90UH948-Q1 , ALP 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1483290/ds90uh947-q1-rosenberger-cable-length 器件型号: DS90UH947…
Other Parts Discussed in Thread: DS90UB960-Q1 , DS90UB953-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1565799/ds90ub960-q1-ds90ub960-q1-using-with-raspberry-pi-or…