E2E™ 设计支持
E2E™ 设计支持
  • 用户
  • 站点
  • 搜索
  • 用户
  • E2E™ 中文设计支持 >
  • 论坛
    • 放大器
    • API 解答
    • 音频
    • 时钟和计时
    • 数据转换器
    • DLP® 产品
    • 接口
    • 隔离
    • 逻辑
    • 微控制器
    • 电机驱动器
    • 处理器
    • 电源管理
    • 射频与微波
    • 传感器
    • 站点支持
    • 开关与多路复用器
    • 工具
    • 无线连接
    • 参考译文
    • 存档组
    • 存档论坛
  • 技术文章
    • 模拟
    • 汽车
    • DLP® 技术
    • 嵌入式处理
    • 工业
    • 电源管理
  • TI 培训
  • 快速入门
  • English
  • 更多
  • 取消


搜索提示
找到 11,833 个结果 查看 问题 帖子 排序依据
    Answered
  • [参考译文] TDES954:将 tdes954 输入链接到 tser953 输出 GPIO

    admin
    admin
    已解决
    Other Parts Discussed in Thread: TDES954 , TSER953 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1605169/tdes954-link-tdes954-input-to-tser953-output-gpio 部件号: TDES954 Thread…
    • 已回答
    • 8 个月前
    • 接口(参考译文帖)
    • 接口(参考译文帖)(Read Only)
  • Answered
  • RE: [参考译文] AM6441:AM6441 定制电路板 — SPL DFU 失败且显示"未找到 USB 器件、udc_device_get_by_index faile"而 ROM DFU 工作

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 尊敬的 Bin Liu: 感谢您的答复和建议的步骤。 我在我的编译中应用了补丁、然后 DFU 挂起问题得到解决。 但是、刷写 tispl.bin 后、电路板会执行复位序列并返回到初始阶段、定制电路板上还有一件事是在外设模式下使用 Type C 端口。 请查找下面随附的主机和电路板日志以供参考。 主机日志; manish@manish-Latitude-7490:~/arm64x…
    • 3 个月前
    • 基于 Arm 的微控制器(参考译文帖)
    • 基于 Arm 的微控制器(参考译文帖)(Read Only)
  • RE: TPS6594-Q1: TPS6594741FRWERQ1 shutdown after about 200ms

    Links
    Links
    The TPS6594741F does a "handshake" with other devices on the platform. After the PMIC sets nRSTOUT high, it will wait for up to 200ms for GPIO6 to be pulled high. If GPIO6 doesn't go high, it will cause a shutdown. After receiving a high…
    • 1 年多前
    • 电源管理
    • 电源管理论坛
  • RE: LP-MSPM0G3507: CCS cannot detect the board

    Vivian Gao
    Vivian Gao
    Buy a standalone XDS110 debug probe, TMDSEMU110-U Precautions (to avoid further damage) 1. Avoid hot-plugging USB when the board has high-voltage peripherals 2. Use a USB hub with overcurrent protection 3. Wear an anti-static wrist strap when working in static…
    • 1 个月前
    • 接口
    • 接口论坛
  • Answered
  • RE: [参考译文] AM4376:CAN't 从 QSPI 闪存启动

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 我开发了 AM437x IDK 、可以使用相同的 u-boot.bin 文件引导 U-Boot 2019.01-ga764a508fd-dirty (Feb 11 2026 - 16:46:24 +0800) CPU : AM437X-GP rev 1.2 Model: TI AM437x Industrial Development Kit DRAM: 1 GiB PMIC…
    • 6 个月前
    • 处理器(参考译文帖)
    • 处理器(参考译文帖)(Read Only)
  • RE: LMK03318: program not ok.

    FRANK1
    FRANK1
    From the description, I believe you have proper communication with the device. When you program the device, what page is being selected for Register Commit Page [see below]? What is the status of GPIO2 and GPIO3? These pins select the EEPROM page loaded…
    • 1 年多前
    • 时钟和时序
    • 时钟和计时论坛
  • Answered
  • [参考译文] TPS25772-Q1:具有集线器的双路 USB PD

    admin
    admin
    已解决
    Other Parts Discussed in Thread: TPS25772-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1563184/tps25772-q1-dual-usb-pd-with-hub 器件型号: TPS25772-…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • RE: [参考译文] TMS320F28388D:如何在 CM 项目中使用 SysConfig GPIO 名称?

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 您好、Aswin、 我尝试将 CPU2转换为 cm、但未成功。 老实说,我不能完全确定我应该采取的步骤。 附件是我实施的修改的图像和说明。 最初、我访问了您提到的示例。 随后、我打开了 CM 示例工程、并将该 CM 工程合并到 system.xml 内的 CM 内核中。 接下来、我将选定的 LED2内核切换到 CM。随后我编译 board.c 和 board.h 文件…
    • 2 年多前
    • C2000™︎ 微控制器(参考译文帖)
    • C2000™︎ 微控制器(参考译文帖)(Read Only)
  • TUSB4041I: TUSB4041 cannot recognize the USB Flash drive

    GAI MENG
    GAI MENG
    TI 认为已经解决
    Part Number: TUSB4041I In the schematic design, the CPU is connected to the PHY of the USB3320, which is then connected to the TUSB4041 for USB interface expansion. When a USB drive is directly connected to the USB3320, it can be recognized. However, when…
    • 9 个月前
    • 接口
    • 接口论坛
  • RE: [参考译文] SK-AM62P-LP:AM62P Android AOSP:连接 USB 电源时、挂起到 RAM 会立即中止/唤醒过快。

    admin
    admin
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 尊敬的 Anshu: 当器件通过挂起和唤醒功能时、使用 CAN 共享日志。 注:现在没有连接摄像机或触摸屏等 USB 设备。 console:/ # echo mem > /sys/power/state [ 295.029648][ T181] ueventd: LoadWithAliases was unable to load rpmsg:rpmsg_ctrl, tried: rpmsg…
    • 3 个月前
    • 处理器(参考译文帖)
    • 处理器(参考译文帖)(Read Only)
<>

未找到您搜索的内容?发布一个新问题吧。

  • 发布新问题