Thank you for the explanation. I have verified that a simple UART example (evm5515_v1\tests\uart) works perfectly using the same flashing method and boot settings. However, my custom USB project fails to boot, with the PC stuck at 0xFFE138 as previously…
Part Number: IWR6843ISK Other Parts Discussed in Thread: IWR6843 We were able to successfully connect and run the system on the Windows platform using USB and IWR6843ISK. However, when we connected the IWR6843ISK to the Linux system via USB, it failed…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您好、Nick。
我只想添加一点、即我们使用的是版本9.00.00.35中的 MCU+SDK。 到目前为止、我们不计划迁移到最新版本。 此 DCC 功能是否也应由 SDK 9.00提供？ 我们的应用的 SYSCFG： /**
* These arguments were used when this file was generated. They will be automatically…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。
Can we do this?
USB-C D+ / D− → Processor USB only USB-C VBUS → BQ25629 VBUS USB-C CC1/CC2 → 5.1kΩ Rd to GND BQ25629 D+ / D− → not used or test pads
然后通过固件在 I²C μ s…
If there are not writes to page 1, then there will be no routing to the headphones and there will not be sound output from the DAC. Please make sure your register writes include all registers in the default playback script.
Here is the default script…
Part Number: TPS25763-Q1 Other Parts Discussed in Thread: TUSB1064 .Hi TI support team
I have some appliaction problems for TPS 25763Q1 as follows:
1. AS the above block diagram, the type-c connector can be connected to U disk or Switcher (DP signal) …
