您好
Functionally the schematic looks correct. I would recommend using an RCD clamp vs a TVS clamp. It helps dampen the ringing at the switch node which will improve EMI and power stage performance.
The output voltage is sense and controlled by VS pin…
Other Parts Discussed in Thread: TIDA-00609 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Other Parts Discussed in Thread: PSPICE-FOR-TI 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Please reference this application note below, but typically the higher resistor leads to a higher resolution.
https://www.ti.com/lit/an/slua792/slua792.pdf?ts=1745250067567&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch…
Other Parts Discussed in Thread: TPS65988DJEVM , TPS65988 , TPS65988DJ 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1405331/tps65988djevm-application…