1. It installed before ADC input to avoid glitch when sample.
2, The datasheet described the bandwidth could get to 900Mhz, it means at 900MHz, the signal could still be sampled. But according to different application, it requires different Nyquist zone…
您好,以LM97937为例,几个latency的定义:
Sample-to-Serial Out (S2SO) Latency—S2SO is the latency from when the signal is sampled at the ADC input until the sample appears in the serial stream at the ADC (TX) output.
Link Delay—Link delay is the delay…
Other Parts Discussed in Thread: TAA5212 , TLV320ADC3120 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1332255/taa5212-recommendations-for-audio-adc-families-with-excellent-input-matching…
Part Number: ADS9120
I encountered a problem when using ads9120: when reading the adc value, I found that the value alternated between 0xffxx and 0x00xx. The driver reads and writes registers in single line mode IO simulation, and reads ADC in 4-line…
