Part Number: PROCESSOR-SDK-J721E Question 1: Can the XDS100V2 debugger be used to debug the J721EXSKG01EVM? There is an interface mismatch between them; the XDS100V2 has a 14-pin interface, while the JTAG interface on the J721EXSKG01EVM is 20 pins. Is it…
Part Number: DRV2700 As mentioned in the title, when using the DRV2700 to control multiple PZT channels, is it possible to share a single BST for all devices? Additionally, if a chip is not provided with BST voltage, should its EN pin be grounded?
Part Number: TMS320F28335 最近在调试CAN通信,我用三块开发板芯片均为TMS320F28335,其中1号开发板配置了两个邮箱用来接收数据,邮箱ID分别为:0x301,0x311;2号开发板配置了一个邮箱用来发送数据,邮箱ID为0x301;3号开发板也配置了一个邮箱用来发送数据,邮箱ID为0x311;2号3号开发板主函数中只有一条语句:自己写的一个发送函数;当1号板与2号板单独通信时,1号板数据接收没有延迟;当1号板与3号板单独通信时,1号板数据接收没有延迟;但是当1、2…
Hi,
The TX7332EVM user's guide are not publicly available. You should apply for the information on the product homepage.
TX7332EVM user's guide is available: https://www.ti.com/tool/TX7332EVM?keyMatch=&tisearch=search-everything&usecase=hardwa…
Part Number: TMS320F280049C CAN驱动中 比特率设置成500k,Bit-time配置成20、22、25可以通过CAN盒接收DSP发送的数据,但是Bit-time配置成21、23、24收不到数据,其中这几种Bit-time中20和23的采样点位置都是60%,21、22、24、25采样点位置分别为58.5%、63%、64%、68%,可以排除硬件上的延迟时间问题,请问这个Bit-time配置不同为什么会导致总线上有数据或没有数据呢?
您好,
是的, TCAN1145-Q1没有短路保护功能。
datasheet 中 10.4.8 Bus Fault Detection and Communication (TCAN1144-Q1 and TCAN1146-Q1),都是针对TCAN1144-Q1 and TCAN1146-Q1这两个器件的描述。
Part Number: TMS320F280049C CAN驱动中 比特率设置成500k,Bit-time配置成20、22、25可以通过CAN盒接收DSP发送的数据,但是Bit-time配置成21、23、24收不到数据,其中这几种Bit-time中20和23的采样点位置都是60%,21、22、24、25采样点位置分别为58.5%、63%、64%、68%,可以排除硬件上的延迟时间问题,请问这个Bit-time配置不同为什么会导致总线上有数据或没有数据呢?