Part Number: TLV320AIC3204EVM-K Hi,
I used the 3204EVM suite to debug and test AGC. I use the P23 interface in the suite for power supply, use external IC to provide MCLK, WCLK, BCLK, SDA, SCL through I2C change register, MIC input from IN1L, after AGC…
Part Number: TLV320ADC6120 Dear Expert:
We connected a simulated MIC at pins 1 and 2, as shown in the following figure,
In a stationary state, i.e. without external sound sources, the waveforms of BCLK-ADC, FSYNC-ADC, and SDOUT-ADC are measured as follows…
Part Number: TLV320ADC5120 Does its I2S slave mode support 3-wire digital audio interface (no MCLK required)?We want to use the GPIO1 as a interupt signal to MCU for voice-activated application.
We need two channel balance analog input so there is no…
我们的产品最近也遇到了这个超出3.8V 后,ADC1256输出改变单调性的问题。
在datasheet里对 buffer on 输入的描述是:
“With the buffer enabled, the voltage on the analog inputs with respect to ground (listed in the Electrical Characteristics as Absolute Input Voltage) must remain between AGND and…
Part Number: CC1310
Hi team, I am using the CC1310 RTOS this code is in a while(1),I found that it's consuming time is about 180ms(approxiately),is the consuming time in this while(1) correct 50kbps rfpacketTX?and then I noticed that the current also…