This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
最近在用AFE032做项目，但是发现AFE032的datasheet上面的pin64脚在管脚描述和参考设计里面出入比较大，管脚描述pin64是PA_VS3但是参考设计都是NC，不知道该怎么弄，麻烦有用过的同志们帮忙看一下。谢谢！
请在Pin46到Pin45之间先预留一颗0OHM电阻，不影响开发进度且方便后续调试。
准确连接在确认中。。。
得到如下确认
Page 12 of datasheet (Pin46 of AFE032 defined as PA_VS3) is the correct one.
非常感谢！
