This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

运算放大器技术文档上都没有延时参数,是不是延时很短啊,能不能达到3ns以内,有没有带使能端的运放?多谢各位高手为菜鸟答疑解惑

Other Parts Discussed in Thread: OPA454

运算放大器技术文档上都没有延时参数,是不是延时很短啊,能不能达到3ns以内,有没有带使能端的运放?多谢各位高手为菜鸟答疑解惑

  • 你好,你关注的延时参数,可以参考运放的建立时间,就是指输出响应输入的阶跃变化,然后进入并保持在规定误差带所需的时间。

    我看了下,0.1%误差所需要的建立时间最快的能到2.2ns ,比如THS770012 、THS770006 。

    关于建立时间的概念,请参考这篇帖子:

    http://www.deyisupport.com/question_answer/analog/amplifiers/f/52/t/21538.aspx

  • 你说的使能端,是不是输出可以disable,使得器件进入低功耗状态? OPA454带有使能端,当disable的时候,进入shutdown状态。