This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在做一个12V供电，0~100mv输入，0~10V输出，频响大于10KHz的放大电路时，出现顶部和底部削波问题
您好，
可以尝试以下方法
1：调整增益设置，确保输出信号在放大器的线性范围内。
2：检查供电电压，考虑使用双电源供电。
3：确保输入信号幅度在允许范围内
