This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
现在正在用ADS8328，读寄存器及采样数据都没有问题，Auto Channel采样正常，Manual Select不能切换到通道1，一直在采样通道0
读完上次的数据后~CS跳高，然后在下次转换前再跳低一次，给16个SCLK，在SDI上写0X1XXX，之后~cS再跳高。这样做是否可行？你可以试一下。
