This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI friends:
我在高通 msm8909平台使用sn65dsi83这颗IC，在写完寄存器参数，PLL_LOCK后，读取0xE5的值为0x31，enable IC 的 SW_IRQ，打开视频数据后，会不停地报中断，读取到的0xE5的值为0x01，请问出现0x01可能的原因是什么？
谢谢！
寄存器 0xE5 的 bit0
PLL_UNLOCK This bit is set whenever the PLL Lock status transitions from LOCK to UNLOCK default 1 R/W1C.
