你好,由于应用需要需要将多个电压输出通道连到同一个外部输入,工作过程中会在不同通道间切换,同一时间只使用一个输出通道其他闲置,请问这样会损坏器件吗?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
如果两输出电压不同,应该会烧掉DAC。
DAC81416是带buffer电压输出的DAC,并联两路DAC,相当于输出端的Buffer并联输出,其结构类似下面figure1,输出电压高的通道会sourcing电流,输出电压低的会sinking电流,这样会烧掉输出buffer,具体见下面链接分析:
https://e2e.ti.com/blogs_/archives/b/thesignal/posts/paralleling-op-amps-is-it-possible
是的不会损坏器件,同时请注意power-down的通道其输出端对地有10kΩ电阻,将多个电压输出通道连到同一个外部输入时,这个10kΩ电阻就会成为使能通道的负载。