如题,TUSB2046B配置为自供电独立通道模式。
腿脚配置如下:
EXTMEM:上拉 GANGED:下拉 TSTMODE:下拉 TSTPLL:下拉 BUSPWR:下拉 EECLK:悬空 OC1-4:上拉 SUSPND:接单片机IO
晶振正常,复位正常
上电后PWRON全部高电平,TPS2042没有输出,USB设备没有供电,不能工作,请问哪里出了问题。谢谢大神指点,在线等!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
PWRON是由主机来控制的,USB协议规定,当有USB device 和USB HUB下行端口连接时,USB会自动相应PWRON信号。
能把您的电路发过来看下吗?