If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1). DS30BA101 uses 100-ohm Resistor for R28 shown in your schematic(in your schematic this is 75 ohm).
2). DS30BA101 has OUT= and OUT-. These outputs could be used as two single-ended 75-ohm cable driver. If you need four single-ended outputs please take a look at LMH0303.
And also , DS30BA101 has OUT+ and OUT-. but they are opposite,so I really can't understand that these outputs could be used as two single-ended 75-ohm cable driver. Can u give me a explanation? thank u
