This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] INA170:使用逻辑信号进行电源多路复用测量

Guru**** 1471450 points
Other Parts Discussed in Thread: INA170, INA138
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1122693/ina170-multiplexed-measurement-using-logic-signal-for-power

器件型号:INA170
主题中讨论的其他器件: INA138

大家好、我能否将 INA170与多负载和多路复用配合使用、如下所示:

它来自 INA138/168数据表:

https://www.ti.com/lit/ds/symlink/ina138.pdf?ts=1659265251390

第8.2.6章