This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] OPA333-Q1:用作跟踪电路时的总电流消耗是多少?

Guru**** 2378830 points
Other Parts Discussed in Thread: OPA333
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/847223/opa333-q1-what-is-the-total-current-consumption-when-act-as-a-tracking-circuit

器件型号:OPA333-Q1
主题中讨论的其他器件:OPA333

尊敬的团队:

用作以下跟踪电路时的总电流消耗是多少? Iload 加 Iq?

谢谢、此致、

雪利

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Sherry、

    是的、总电流消耗是静态电流加上负载电流。  

    平均负载电流取决于负载阻抗以及信号的振幅和频率。

    为了估算负载电流、您需要了解 OPA333驱动的负载的阻抗特性以及信号的振幅和频率。   

    谢谢、此致、

    Luis