This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1546637/faq-am263p4-enabling-gpio-interrupt-in-mcal-for-am263p4
工具/软件：
在此常见问题解答中、我将介绍 在 AM263P4 的 MCAL 中启用引脚 MCU_GPIO64 和 MCU_GPIO63 中断所需的配置。
port_pbcfg.c - pinmux 和中断通知配置：
xbar — 中断的 Mcu_Pbcfg 配置：
Port_Cfg .h — 中断的通道被激活：
测试应用 — 中断配置：
