This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TMS570LS3137:BANK7闪存如何写入具有偏移的数据

Guru**** 2587345 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1115182/tms570ls3137-how-bank7-flash-writes-data-with-offset

器件型号:TMS570LS3137

大家好、

以下是客户提出的问题、可能需要您的帮助:

正常的 FEE 擦除、读取和写入都很好。  客户希望知道如何写入偏移量。 手册中描述的闪存功能是从块的起始地址写入数据。

如果每个块定义64字节、客户如何写入128字节的数据并从该地址写入偏移量0x100的数据?

您可以帮助检查此案例吗? 谢谢。

此致、

樱桃

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Cherry、

    如果块大小为64字节、则只有数据阵列的前64字节数据(128字节)会写入块。 块的起始地址由 FEE 驱动器计算。  

    FEE 数据写入 API 不接受地址偏移量。