This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] RM44L920:连接到目标时出错

Guru**** 2387830 points
Other Parts Discussed in Thread: RM44L920
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1033160/rm44l920-error-connecting-to-the-target

器件型号:RM44L920

你(们)好 我是来自韩国 RS Automation 的 Hoseong Yun。

最近、我们开始将 RM44L920 Hercules CPU 用于我们的安全系统。

当我 尝试调试电路板时、我发现下面的消息

我们使用 RM44L920PGET、调试器是 XDS560v2 STM。

那么、您能告诉我如何解决这个问题吗?

谢谢你

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    霍 城、您好!

    JTAG nTRST 信号应下拉您的电路板。 请仔细检查。

    该消息显示不支持仿真器。 您是否使用 TI CCS? 您能否重新安装仿真器驱动程序?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    我解决了。 谢谢你