[参考译文] TMDSCNCD263：SPI 数据宽度配置

尊敬的 Rubina：

我已经将其分配给了我们的 SPI 专家。

谢谢

尊敬的 Rubina：

您能否共享 SPI 配置？ SPI_Cfg.c、SPI_PBcfg.c

谢谢。此致、

Sunil Kumar M S

您好、Sunil：

请查找文件

/*
*
* Copyright (c) 2022 Texas Instruments Incorporated
*
* All rights reserved not granted herein.
*
* Limited License.
*
* Texas Instruments Incorporated grants a world-wide, royalty-free, non-exclusive
* license under copyrights and patents it now or hereafter owns or controls to make,
* have made, use, import, offer to sell and sell ("Utilize") this software subject to the
* terms herein.  With respect to the foregoing patent license, such license is granted
* solely to the extent that any such patent is necessary to Utilize the software alone.
* The patent license shall not apply to any combinations which include this software,
* other than combinations with devices manufactured by or for TI ("TI Devices").
* No hardware patent is licensed hereunder.
*
* Redistributions must preserve existing copyright notices and reproduce this license
* (including the above copyright notice and the disclaimer and (if applicable) source
* code license limitations below) in the documentation and/or other materials provided
* with the distribution
*
* Redistribution and use in binary form, without modification, are permitted provided
* that the following conditions are met:
*
* *       No reverse engineering, decompilation, or disassembly of this software is
* permitted with respect to any software provided in binary form.
*
* *       any redistribution and use are licensed by TI for use only with TI Devices.
*
* *       Nothing shall obligate TI to provide you with source code for the software
* licensed and provided to you in object code.
*
* If software source code is provided to you, modification and redistribution of the
* source code are permitted provided that the following conditions are met:
*
* *       any redistribution and use of the source code, including any resulting derivative
* works, are licensed by TI for use only with TI Devices.
*
* *       any redistribution and use of any object code compiled from the source code
* and any resulting derivative works, are licensed by TI for use only with TI Devices.
*
* Neither the name of Texas Instruments Incorporated nor the names of its suppliers
*
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* DISCLAIMER.
*
* THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/

/**
 *  \file     Spi_Cfg.h
 *
 *  \brief    This file contains generated pre compile configuration file
 *            for SPI MCAL driver
 */

  /*****************************************************************************
    Project: Lecu
    Date   : 2023-06-06 10:38:03
    This file is generated by EB Tresos
    Do not modify this file, otherwise the software may behave in unexpected way.
 ******************************************************************************/

/**
 *  \defgroup MCAL_SPI_CFG SPI Configuration
 *
 *  This files defines SPI MCAL configuration structures
 *  @{
 */

#ifndef SPI_CFG_H_
#define SPI_CFG_H_

/* ========================================================================== */
/*                             Include Files                                  */
/* ========================================================================== */
#include "Os.h"
#include "Dem.h"
#include "Det.h"
#include "Spi_Cbk.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
*  \brief SPI Build Variant.
*   Build variants.(i.e Pre Compile,Post Build or Link time)
*/

#define SPI_PRE_COMPILE_VARIANT       (STD_OFF)

#define SPI_VARIANT_POST_BUILD        (STD_ON)

#define SPI_LINK_TIME_VARIANT         (STD_OFF)

/** \brief SPI Config ID */
#define SPI_CFG_ID          (0x1U)

/**
 *  \brief Pre Compile config macro name.
 */


/** \brief Buffer mode - Internal or External or Both */
#define SPI_CHANNELBUFFERS          (SPI_IB_EB)

/** \brief Internal Buffer length in bytes - applicable only for SPI_IB */
#define SPI_IB_MAX_LENGTH           (64U)

/** \brief Enable/disable SPI dev detect error */
#define SPI_DEV_ERROR_DETECT        (STD_ON)

/** \brief Enable/disable SPI job log */
#define SPI_JOB_LOG                 (STD_OFF)

/** \brief Maximum job log entries when logging is ON */
#define SPI_MAX_JOB_LOG             (100U)

/*
 * Scalability levels
 */
/** \brief Basic Synchronous functions */
#define SPI_LEVEL_0                     (0U)
/** \brief Basic Asynchronous functions */
#define SPI_LEVEL_1                     (1U)
/** \brief Synchronous and Asynchronous functions */
#define SPI_LEVEL_2                     (2U)

/** \brief Concurrent sync transmit support - by defualt this is off */
#define SPI_SUPPORT_CONCURRENT_SYNC_TRANSMIT    (STD_OFF)

/** \brief Scalability level */
#define SPI_SCALEABILITY            (SPI_LEVEL_2)

/** \brief Enable/disable SPI get version info API */
#define SPI_VERSION_INFO_API        (STD_ON)

/** \brief Enable/disable SPI HW Status API */
#define SPI_HW_STATUS_API           (STD_ON)

/** \brief Enable/disable SPI cancel API */
#define SPI_CANCEL_API              (STD_ON)

/*
 * All below macros are used for static memory allocation and can be changed to
 * match the usecase requirements.
 */
/** \brief Maximum channels allowed per job */
#define SPI_MAX_CHANNELS_PER_JOB    (2U)

/** \brief Maximum jobs allowed per sequence */
#define SPI_MAX_JOBS_PER_SEQ        (2U)

/** \brief Maximum channels across all jobs/sequence/hwunit */
#define SPI_MAX_CHANNELS            (2U)

/** \brief Maximum jobs across all sequence/hwunit */
#define SPI_MAX_JOBS                (2U)

/** \brief Maximum sequence across all hwunit */
#define SPI_MAX_SEQ                 (2U)

/**
 *  \brief Maximum HW unit - This should match the sum for the below units ISR
 *  which are ON.
 */
#define SPI_MAX_HW_UNIT             (2U)

/**
 *  \brief Maximum external device cfg
 */
#define SPI_MAX_EXT_DEV             (2U)





/*
 All below macros are used for enabling the ISR for a particular hardware.
 */


/** \brief Enable/disable SPI MCSPI0 unit ISR */

#define SPI_UNIT_MCSPI0_ACTIVE      (STD_ON)

/** \brief Enable/disable SPI MCSPI1 unit ISR */

#define SPI_UNIT_MCSPI1_ACTIVE      (STD_ON)

/** \brief Enable/disable SPI MCSPI2 unit ISR */

#define SPI_UNIT_MCSPI2_ACTIVE      (STD_OFF)

/** \brief Enable/disable SPI MCSPI3 unit ISR */

#define SPI_UNIT_MCSPI3_ACTIVE      (STD_OFF)


/** \brief Enable/disable SPI MCSPI4 unit ISR */

#define SPI_UNIT_MCSPI4_ACTIVE      (STD_OFF)







/** \brief ISR type */
#define SPI_ISR_TYPE                (SPI_ISR_CAT2)

/** \brief OS counter ID - used for timeout in case of error */
#define SPI_OS_COUNTER_ID           ((CounterType)0U)

/**
 *  \brief SPI timeout - used in McSPI IP reset
 *   Each tick is 31.25us (for 32K Counter). Wait for 100ms which comes to
 *   below value
 */
#define SPI_TIMEOUT_DURATION        (32000U)

/** \brief Enable/disable SPI register read back API */
#define SPI_REGISTER_READBACK_API   (STD_ON)

/** \brief Enable/disable SPI safety API */
#define SPI_SAFETY_API   (STD_ON)

/** \brief Symbolic Name Channel Id  - 0 SpiChannel_0 */
#define SpiConf_SpiChannel_SpiChannel_0   0
/** \brief Symbolic Name Channel Id  - 1 SpiChannel_1 */
#define SpiConf_SpiChannel_SpiChannel_1   1

/** \brief Symbolic Name Chip Select  - 0 */
#define SpiConf_SpiExternalDevice_CS0 (SPI_CS0)


/** \brief Symbolic Name Job Id - 0 SpiJob_0 */
#define SpiConf_SpiJob_SpiJob_0            0


/** \brief Symbolic Name Chip Select  - 1 */
#define SpiConf_SpiExternalDevice_CS1 (SPI_CS0)


/** \brief Symbolic Name Job Id - 1 SpiJob_1 */
#define SpiConf_SpiJob_SpiJob_1            1

/** \brief Symbolic Name Sequence Id - 0 SpiSequence_0 */
#define SpiConf_SpiSequence_SpiSequence_0  0
/** \brief Symbolic Name Sequence Id - 1 SpiSequence_1 */
#define SpiConf_SpiSequence_SpiSequence_1  1


#define SpiConf_SpiExternalDevice_SpiExternalDevice_0_CS0 SCS0
#define SpiConf_SpiExternalDevice_SpiExternalDevice_1_CS0 SCS0
/** \brief Symbolic Name HW Unit - 0 */
#define SpiConf_SpiExternalDevice_SpiExternalDevice_0_HwUnitId0 CSIB0
/** \brief Symbolic Name HW Unit - 0 */
#define SpiConf_SpiExternalDevice_SpiExternalDevice_1_HwUnitId1 CSIB0


/**
 *  \name SPI DEM Error codes to report
 *
 *  Pre-compile switches for enabling/disabling DEM events
 *  @{
 */
#define DemConf_DemEventParameter_SPI_DEM_NO_EVENT (0xFFFFU)
#define SPI_DEM_NO_EVENT DemConf_DemEventParameter_SPI_DEM_NO_EVENT

#ifndef SPI_E_HARDWARE_ERROR
/** \brief Hardware failed */
#define SPI_E_HARDWARE_ERROR        (DemConf_DemEventParameter_SPI_E_HARDWARE_ERROR)
#endif
/**
 *  \name SPI HW unit Info
 *  @{
 */

/** \brief MCSPI0 instance */
#define SPI_UNIT_MCSPI0                     ((Spi_HWUnitType) CSIB0)
/** \brief MCSPI1 instance */
#define SPI_UNIT_MCSPI1                     ((Spi_HWUnitType) CSIB1)
/** \brief MCSPI2 instance */
#define SPI_UNIT_MCSPI2                     ((Spi_HWUnitType) CSIB2)
/** \brief MCSPI3 instance */
#define SPI_UNIT_MCSPI3                     ((Spi_HWUnitType) CSIB3)
/** \brief MCSPI4 instance */
#define SPI_UNIT_MCSPI4                     ((Spi_HWUnitType) CSIB4)


/**
 *  \brief Total HW units - used for array allocation. This should be +1 of the
 *  max unit number
 */
#define SPI_HW_UNIT_CNT                 (5U)

extern const uint32 Spi_HwUnitBaseAddr[SPI_HW_UNIT_CNT];

/* @} */

/* ========================================================================== */
/*                         Structures and Enums                               */
/* ========================================================================== */


/** \brief SPI Configuration struct declaration */
extern const struct Spi_ConfigType_s SpiDriver;


/* ========================================================================== */
/*                          Function Declarations                             */
/* ========================================================================== */
/**
 *  \brief SPI Hwunit ISR
 */

/*Function prototypes-ISR() are declared by OS for SPI_ISR_CAT2 */

#ifdef __cplusplus
}
#endif

#endif  /* #ifndef SPI_CFG_H_ */

/* @} */

/*
*
* Copyright (c) 2022 Texas Instruments Incorporated
*
* All rights reserved not granted herein.
*
* Limited License.
*
* Texas Instruments Incorporated grants a world-wide, royalty-free, non-exclusive
* license under copyrights and patents it now or hereafter owns or controls to make,
* have made, use, import, offer to sell and sell ("Utilize") this software subject to the
* terms herein.  With respect to the foregoing patent license, such license is granted
* solely to the extent that any such patent is necessary to Utilize the software alone.
* The patent license shall not apply to any combinations which include this software,
* other than combinations with devices manufactured by or for TI ("TI Devices").
* No hardware patent is licensed hereunder.
*
* Redistributions must preserve existing copyright notices and reproduce this license
* (including the above copyright notice and the disclaimer and (if applicable) source
* code license limitations below) in the documentation and/or other materials provided
* with the distribution
*
* Redistribution and use in binary form, without modification, are permitted provided
* that the following conditions are met:
*
* *       No reverse engineering, decompilation, or disassembly of this software is
* permitted with respect to any software provided in binary form.
*
* *       any redistribution and use are licensed by TI for use only with TI Devices.
*
* *       Nothing shall obligate TI to provide you with source code for the software
* licensed and provided to you in object code.
*
* If software source code is provided to you, modification and redistribution of the
* source code are permitted provided that the following conditions are met:
*
* *       any redistribution and use of the source code, including any resulting derivative
* works, are licensed by TI for use only with TI Devices.
*
* *       any redistribution and use of any object code compiled from the source code
* and any resulting derivative works, are licensed by TI for use only with TI Devices.
*
* Neither the name of Texas Instruments Incorporated nor the names of its suppliers
*
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* DISCLAIMER.
*
* THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/

/**
 *  \file     Spi_PBcfg.c
 *
 *  \brief    This file contains generated post build configuration file
 *            for SPI MCAL driver
 */

  /*****************************************************************************
    Project: Lecu
    Date   : 2023-06-06 10:38:03
    This file is generated by EB Tresos
    Do not modify this file, otherwise the software may behave in unexpected way
 ******************************************************************************/
/*******************************************************************************
 *  INCLUDES
 ******************************************************************************/
#include "Spi.h"
#include "Spi_Irq.h"


/*******************************************************************************
 *  VERSION CHECK
 ******************************************************************************/
#if ((SPI_SW_MAJOR_VERSION != (8U)) || (SPI_SW_MINOR_VERSION != (6U)))
  #error "Version numbers of Spi_PBcfg.c and Spi.h are inconsistent!"
#endif
/*******************************************************************************
 *  LOCAL CONSTANT MACROS
 ******************************************************************************/

/*******************************************************************************
 *  LOCAL FUNCTION MACROS
 ******************************************************************************/

/*******************************************************************************
 *  LOCAL DATA TYPES AND STRUCTURES
 ******************************************************************************/

/*******************************************************************************
 *  LOCAL DATA PROTOTYPES
 ******************************************************************************/

/*******************************************************************************
 *  GLOBAL DATA
 ******************************************************************************/
#define  SPI_START_SEC_CONFIG_DATA
#include "Spi_MemMap.h"
/* generation of runtime configuration       */

#ifdef __cplusplus
extern "C" {
#endif



extern void SpiApp_McspiJob0EndNotification(void);
extern void SpiApp_McspiJob1EndNotification(void);

extern void SpiApp_McspiSeq0EndNotification(void);
extern void SpiApp_McspiSeq1EndNotification(void);

CONST(struct Spi_ConfigType_s, SPI_CONFIG_DATA) SpiDriver =
{
    .maxChannels = 2U,
    .maxJobs = 2U,
    .maxSeq  = 2U,
    .maxHwUnit = 2U,
    .maxExtDevCfg = 2U,
    .channelCfg =
    {
            [0] =
            {
                .channelBufType = SPI_EB,
                .dataWidth = 8U,
                .defaultTxData = 0U,
                .maxBufLength = 100U,
                .transferType = SPI_MSB,
            },
            [1] =
            {
                .channelBufType = SPI_EB,
                .dataWidth = 8U,
                .defaultTxData = 0U,
                .maxBufLength = 100U,
                .transferType = SPI_MSB,
            },
        },
    .jobCfg =
    {
            [0] =
            {
                .jobPriority = SPI_JOB_PRIORITY_0,
                .hwUnitId = SPI_UNIT_MCSPI0,
                .Spi_JobEndNotification = SpiApp_McspiJob0EndNotification,
                .channelPerJob = 1U,
                .channelList =
                {
                    [0] = 0U,
                },
            },
            [1] =
            {
                .jobPriority = SPI_JOB_PRIORITY_1,
                .hwUnitId = SPI_UNIT_MCSPI1,
                .Spi_JobEndNotification = SpiApp_McspiJob1EndNotification,
                .channelPerJob = 1U,
                .channelList =
                {
                    [1] = 1U,
                },
            },
        },
    .seqCfg =
    {
            [0] =
            {
                .seqInterruptible = (uint8) TRUE,
                .Spi_SequenceEndNotification = SpiApp_McspiSeq0EndNotification,
                .jobPerSeq = 1U,
                .jobList =
                {
                    0U,
                },
            },
            [1] =
            {
                .seqInterruptible = (uint8) TRUE,
                .Spi_SequenceEndNotification = SpiApp_McspiSeq1EndNotification,
                .jobPerSeq = 1U,
                .jobList =
                {
                    1U,
                },
            },
        },
    .hwUnitCfg =
    {
            [0] =
            {
                .hwUnitId = SPI_UNIT_MCSPI0,
            },
            [1] =
            {
                .hwUnitId = SPI_UNIT_MCSPI1,
            },
        },
    .extDevCfg =
    {
            [0] =
            {
        .mcspi =
                {
                    .csEnable = (uint16) TRUE,
                    .csMode   = SPI_CONTINUOUS,
                    .csPolarity = SPI_HIGH,
                    .csIdleTime = SPI_DATADELAY_0,
                    .clkDivider = 99U,
                    .clkMode = SPI_CLK_MODE_0,
                    .txRxMode     = SPI_TX_RX_MODE_BOTH,
                    .startBitEnable =  (uint16) FALSE,
                    .startBitLevel  = SPI_LOW,
                    .receptionLineEnable  = DATA_LINE_0_RECEPTION,
                    .transmissionLineEnable  = DATA_LINE_0_TRANSMISSION,
                },
            },
            [1] =
            {
        .mcspi =
                {
                    .csEnable = (uint16) TRUE,
                    .csMode   = SPI_CONTINUOUS,
                    .csPolarity = SPI_HIGH,
                    .csIdleTime = SPI_DATADELAY_0,
                    .clkDivider = 49U,
                    .clkMode = SPI_CLK_MODE_1,
                    .txRxMode     = SPI_TX_RX_MODE_BOTH,
                    .startBitEnable =  (uint16) TRUE,
                    .startBitLevel  = SPI_LOW,
                    .receptionLineEnable  = DATA_LINE_0_RECEPTION,
                    .transmissionLineEnable  = DATA_LINE_1_TRANSMISSION,
                },
            },
        },
};



CONST(Spi_ChannelConfigType_PC, SPI_CONFIG_DATA) Spi_ChannelConfig_PC[] =
{
    [0] =
        {
            .channelId = SpiConf_SpiChannel_SpiChannel_0,
        },
    [1] =
        {
            .channelId = SpiConf_SpiChannel_SpiChannel_1,
        },
};

CONST(Spi_JobConfigType_PC, SPI_CONFIG_DATA) Spi_JobConfig_PC[] =
{
    [0] =
        {
            .jobId = SpiConf_SpiJob_SpiJob_0,
            .csPin = SpiConf_SpiExternalDevice_CS0,
            .externalDeviceCfgId = (uint8)0,
        },
    [1] =
        {
            .jobId = SpiConf_SpiJob_SpiJob_1,
            .csPin = SpiConf_SpiExternalDevice_CS1,
            .externalDeviceCfgId = (uint8)1,
        },
};

CONST(Spi_SeqConfigType_PC, SPI_CONFIG_DATA) Spi_SeqConfig_PC[] =
{
    [0] =
        {
            .seqId = SpiConf_SpiSequence_SpiSequence_0,
        },
    [1] =
        {
            .seqId = SpiConf_SpiSequence_SpiSequence_1,
        },
};



/**
 *  \brief This type defines a range of HW SPI Hardware microcontroller
 *         peripheral allocated to this Job
 */
const uint32 Spi_HwUnitBaseAddr[SPI_HW_UNIT_CNT] =
{
 
 
   0x52200000 ,      	            /* MCSPI0 */
   0x52201000 ,      	    /* MCSPI1 */
   0x52202000 ,      	    /* MCSPI2 */
   0x52203000 ,      	    /* MCSPI3 */
   0x52204000      	    /* MCSPI4 */
};

#ifdef __cplusplus
}
#endif

#define  SPI_STOP_SEC_CONFIG_DATA
#include "Spi_MemMap.h"

#define  SPI_START_SEC_ISR_CODE
#include "Spi_MemMap.h"
/**
 *  \brief SPI Hwunit ISR
 */


ISR(Spi_IrqUnitMcspi0TxRx)
{
    Spi_IntISR_McspiTxRx(SPI_UNIT_MCSPI0);
}

ISR(Spi_IrqUnitMcspi1TxRx)
{
    Spi_IntISR_McspiTxRx(SPI_UNIT_MCSPI1);
}

#define  SPI_STOP_SEC_ISR_CODE
#include "Spi_MemMap.h"
/*******************************************************************************
 *  END OF FILE: Spi_PBcfg.c
 ******************************************************************************/

谢谢。此致、

鲁比纳  

尊敬的 Rubina：

您能澄清以下问题吗？

1. 在连接的配置中、 SPI0实例配置为  环回模式、SPI1实例未配置为环回模式。 这是预期结果吗？
2. 在您所连接的快照中、您能解释什么是0xFF、0x12、0x1FF 吗？ 很抱歉、我清楚地理解了。

谢谢。此致、

Sunil Kumar M S

您好、Sunil：

1.没有配置要求。 从那里 将 SPI1配置为环回模式

2.在此快照中  

12是 MOSI 数据。

FF 和1FF 是来自 MISO 的数据。

尊敬的 Rubina：

您能解释一下您在这里设置的测试吗？

 SPI0和 SPI1是否已连接至任何从器件？

我看到您在环回模式下配置了 SPI0、而没有配置 SPI1。

此外、您还配置了 SPI1_CS1、CS1是否连接到从器件？

谢谢。此致、

Sunil Kumar M S

您好、Sunil：

到目前为止、未连接从器件。 我只是单独验证 SPI TX。  

谢谢。此致、

J·鲁比纳

尊敬的 Rubina：

您能否共享 SPI0和 SPI1的 MOSI 和 MISO 波形？ 请勿启用逻辑分析仪来分析 SPI 数据？ 我想在没有它的情况下进行检查。   

谢谢。此致、

Sunil Kumar M S

尊敬的 Rubina：

这里有更新吗？

谢谢。此致、

Sunil Kumar M S

您好、Sunil：

请查找 MISO 和 MOSI 的 SPI 1波形

请找到 SPI 0 MISO 和 MOSI 的波形

尊敬的 Rubina：

感谢您分享这些波形。 如果我查看 SPI1 配置、您已经启用了起始位。 因此、将 在 MSB 之前添加起始位、以指示
下一个 MCSPI 字是必须作为命令处理还是作为数据处理。 请参阅部分 "MCSPI 协议和数据格式" 其他信息。

谢谢。此致、

Sunil Kumar M S

您好、Sunil：

谢谢你。 我来签入配置并将其更新为  

谢谢。此致、

J·鲁比纳