This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1355301/mspm0l1306-gpio-and-high-impedance
产品编号：MSPM0L1306
请问MSP1306的GPIO端口是否可以设置为高阻抗输出模式
您好！
只有 PA0和 PA1是开漏引脚。
但如果您需要、可以尝试将引脚设置为输入模式以实现 高电阻。
谢谢！
