This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPA2011D1:输出波形问题

Guru**** 2533950 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1079134/tpa2011d1-output-waveform-question

部件号:TPA2011D1

请参阅随附的文件了解电路和 TPA2011输出波形,

我的问题是:

输出信号过冲/欠冲,这是否正常?

我们如何才能改进? 谢谢你

e2e.ti.com/.../TPA2011D1.docx

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    Mark,您好!

    您可以尝试不同的电感器或铁氧体并降低电容器值。

    此致,
    伊万·萨拉扎尔
    应用工程师