This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] PCM1690:释放复位后发出噼啪噪声

Guru**** 2391295 points
Other Parts Discussed in Thread: PCM1690

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/audio-group/audio/f/audio-forum/976175/pcm1690-pop-noise-after-releasing-reset

器件型号:PCM1690

您好!

我的客户正在  使用直流耦合评估 PCM1690 (请参阅数据表上的图40)。

 释放 RST 后、在输出偏置直流电压期间可以听到噼啪噪声。

内部红色矩形是一个噼啪噪声波形。

e2e.ti.com/.../3021.PCM1690.xlsx

是否有任何解决方案可以解决噼啪噪声问题?

此致、

Kuramochi

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    似乎是重复的问题。  请参阅原始主题。