This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DIT4192:软件模式中的 NC 引脚

Guru**** 2513185 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/audio-group/audio/f/audio-forum/956621/dit4192-nc-pins-in-software-mode

器件型号:DIT4192

大家好、

快速问题。

在软件模式用例中、可以将 NC 引脚连接到 GND 吗?

谢谢、

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Hirai-San、

    NC 引脚应保持未连接状态、以避免干扰软件设置。

    最棒的

    Zak