[参考译文] CC2652R7：文件加载器：内存写入失败：等待目标闪存加载器执行命令超时

Other Parts Discussed in Thread: UNIFLASH, CC2652R7

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1074123/cc2652r7-file-loader-memory-write-failed-timed-out-waiting-for-target-flashloader-to-execute-command

在 UniFlash v6.4.0 (GUI 或 CLI)中发出加载操作时，将返回此故障：

INFO：Cortex_M4_0：command=20-- addr=0x000AFF54 -- length=0x00000050

错误：Cortex_M4_0：文件加载器：内存写入失败：等待目标闪存加载器执行命令超时。

完成99%  

失败

尝试通过 Blackhawk XDS200对设备进行编程。

我以前在 MassErase 过程中遇到过对 JTAG 频率的灵敏度，但调整 JTAG 频率不会改变结果(尝试了100KHz 到1.2MHz 之间的各种值)

如果我将为 CC2652R1编译的类似程序加载 到 CC2652R7设备，则不会遇到任何问题。

使用的配置文件：

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<configurations XML_version="1.2" id="configurations_0">
<configuration XML_version="1.2" id="Texas Instruments XDS2xx USB Debug Probe_0">
        <instance XML_version="1.2" desc="Texas Instruments XDS2xx USB Debug Probe_0" href="connections/TIXDS2XXUSB_Connection.xml" id="Texas Instruments XDS2xx USB Debug Probe_0" xml="TIXDS2XXUSB_Connection.xml" xmlpath="connections"/>
        <connection XML_version="1.2" id="Texas Instruments XDS2xx USB Debug Probe_0">
            <instance XML_version="1.2" href="drivers/tixds560icepick_c.xml" id="drivers" xml="tixds560icepick_c.xml" xmlpath="drivers"/>
            <instance XML_version="1.2" href="drivers/tixds560cs_dap.xml" id="drivers" xml="tixds560cs_dap.xml" xmlpath="drivers"/>
            <instance XML_version="1.2" href="drivers/tixds560cortexM.xml" id="drivers" xml="tixds560cortexM.xml" xmlpath="drivers"/>
            <property Type="choicelist" Value="2" id="The cJTAG / SWD Features">
                <choice Name="cJTAG (1149.7) 2-pin advanced modes" value="enable">
                    <property Type="choicelist" Value="5" id="The Target Scan Format"/>
                </choice>
            </property>
            <property Type="choicelist" Value="0" id="The JTAG TCLK Frequency (MHz)">
                <choice Name="Fixed with user specified faster value" value="SPECIFIC">
                    <property Type="stringfield" Value="1.2MHz" id="-- Enter a value from 0.5MHz to 20.0MHz"/>
                </choice>
            </property>
            <property Type="choicelist" Value="2" id="Debug Probe Selection">
                <choice Name="Select by serial number" value="2">
                    <property Type="stringfield" Value="S200-000FD2053545" id="-- Enter the serial number"/>
                </choice>
            </property>
            <platform XML_version="1.2" id="platform_0">
                <instance XML_version="1.2" desc="CC2652R7_0" href="devices/cc2652r7.xml" id="CC2652R7_0" xml="cc2652r7.xml" xmlpath="devices"/>
            </platform>
        </connection>
    </configuration>
</configurations>

请提前感谢。