This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CC2650RC:CC2640R2F 射频前端设计

Guru**** 2350610 points
Other Parts Discussed in Thread: CC2650RC
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/634630/cc2650rc-cc2640r2f-rf-front-end-design

器件型号:CC2650RC

您好!

我们注意到 CC2650RC 和 EM 板之间的射频前端设计存在差异。 您能否帮助解释差异以及我们建议客户采用哪种设计?

谢谢!

Christina


 

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好、Christina、

    我看不到您发布的图片、但我认为您的问题是直流阻断电容器的放置。 用于 RC 的配置只适用于内部偏置、而不适用于外部偏置。 除此之外、性能没有差异。

    此致、
    Fredrik