• 状态 Resolved
  • 已锁定 已锁定
  • 回复 1 回复
  • 订户 0 订户
  • 视图 150 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LINUX/CC2564C：启用/禁用 BLE 功能后、WBS SCO 无输出

admin
Guru**** 2763545 points
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/695822/linux-cc2564c-no-output-of-wbs-sco-once-enable-disable-ble-function

器件型号：CC2564C

工具/软件：Linux

您好！

在使用 HCI 命令 HCI_VS_LE_ENABLE 0x01 0x01启用 BLE 功能之前、连接的耳机可以根据 WBS SCO 类型输出语音。

启用 BLE 并使用命令 HCI_VS_LE_ENABLE 0x00成功禁用 BLE 后、耳机将无法再根据 WBS SCO 类型输出语音。

同时、NBS 在上述情况下工作良好。

禁用 BLE 后、我还应该做些什么来使 WBS 正常工作？

谢谢。