This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1232713/cc2652r-ble-mac-address-and-name-write-command-though-uart
您好
我想 通过 UART 刷写 MAC 地址和 BLE 本地名称。 (TX、RX、复位、后门引导加载程序引脚连接在我们的板中使用此设置我们已经闪存二进制映像)
他们是否有任何命令可用于更改 BLE 的 MAC 地址？
他们是否有任何命令可用于更改 BLE 广播名称或 BLE 本地名称？
您好！
感谢您与我们取得联系、
MAC 地址直接写入器件中、但您可以修改临时软件 MAC 地址、方法是在 SysConfig 文件> BLE > General Configuration 中更改 Address Mode、然后选择一个随机地址、 但您需要小心、它是否符合蓝牙核心规范。
要更改器件名称、必须打开 SysConfig 文件> BLE > General Configuration 并修改广播名称。
您可以查看下面的实验、了解更多信息：
https://dev.ti.com/tirex/explore/node?node=A__ANMyae.CO9yVtLDYV69c6g__com.ti.SIMPLELINK_ACADEMY_CC13XX_CC26XX_SDK__AfkT0vQ__LATEST
此致、
纪尧姆、您好！
我想手动更改 BLE 广播 MAC 地址,他们是否有任何命令可用于更改 BLE MAC 地址?
此外、对于 BLE name、他们是否有任何命令可用于更改 BLE 广播或广播名称？
我们要求此器件用于生产/制造目的。
如果我想将00：11：22：33：44：55：66设置为 BLE MAC addr、将 BLE 名称设置为 XYZ_445566、这是 MAC addr 的最后3个字节、而且也不更改二进制或十六进制。 就是它们通过 UART 写入该地址的任意方法。
您可以在下面找到所有 API 参考、尤其是 HCI 命令：
https://dev.ti.com/tirex/explore/content/simplelink_cc13xx_cc26xx_sdk_7_10_00_98/docs/ble5stack/ble_user_guide/doxygen/ble/html/group___h_c_i.html
和 GAP One 还：
https://dev.ti.com/tirex/explore/content/simplelink_cc13xx_cc26xx_sdk_7_10_00_98/docs/ble5stack/ble_user_guide/doxygen/ble/html/group___g_a_p.html#gabd7c5f3cc85470854cf425e7e49b5ca5
例如、您可以使用 HCI_EXT_SetVirtualAdvAddrCmd ()
目前、我们的器件上没有 UART 转 BLE 桥接器。
