请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC2564CSTBTBLESW 主题中讨论的其他器件:CC2564
我正在使用 https://www.ti.com/tool/CC2564CSTBTBLESW 、想要评估 A3DP 源演示。 请注意、我已经工作并确认了 A3DP 受电方演示。
关于源演示、我想知道如何连接蓝牙模块、以便我可以管理源设备、尤其是要选择要连接的接收设备。
我曾尝试使用用于对电路板进行编程的 USB 电缆进行检查、但它不会在设备管理器中触发 COM 端口。
我的试剂盒为:
- MCU: STM3240G-EVAL
- 适配器:CC256XEM-STADAPT (https://www.ti.com/product/CC256XSTBTBLESW/part-details/CC256XEM-STADAPT)
- 蓝牙: CC2564 (https://www.mouser.fr/new/panasonic/panasonic-pan1326c2-bluetooth-rf-module/#RelatedContent-7)
我找不到有关如何访问蓝牙接口并选择扬声器或耳机(COM、UART...)等蓝牙接收器的文档?