This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CDCM6208V1F:取消使用输出 Y1,Y2,Y3,Y4,Y5和 Y7

Guru**** 1555210 points
Other Parts Discussed in Thread: CDCM6208V1F
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/clock-timing-group/clock-and-timing/f/clock-timing-forum/1071538/cdcm6208v1f-unuse-output-y1-y2-y3-y4-y5-and-y7

部件号:CDCM6208V1F

你(们)好

如果我们询问 CDCM6208V1F,您会介意吗?

我们的客户将仅使用带有 Y0和 Y6的 CDCM6208V1F。
客户希望降低能耗。

问题1>
是否可以关闭 VDD_Y2_Y3,VDD_Y4, VDD_Y5和  VDD_Y7?

<Question2>
关于<question1>,与开机状态和每个状态都禁用输出相比,
关闭 VDD_Y2_Y3, VDD_Y4, VDD_Y5和 VDD_Y7是否会提高功耗?
它假定它只会减少泄漏电流。

<Question3>

当<question1>和<Question2>不是问题时,以下哪项适合再次出现?
-关闭 VDD_Y2_Y3, VDD_Y4, VDD_Y5和 VDD_Y7
-打开电源,每一个都禁用输出

此致,

松本宏