This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] ADC128S102:通过将/CS 连接到 GND 运行

Guru**** 2448780 points
Other Parts Discussed in Thread: ADC128S102

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1394877/adc128s102-operate-with-tying-cs-to-gnd

器件型号:ADC128S102

工具与软件:

尊敬的团队:

我们尝试使用 ADC128S102。 我们不需要同步功能、因此我们将通过下拉电阻将/CS-pin 连接到 GND。  

会有问题吗?

在数据表中、有几个/CS 下降沿的字。 因此、我担心此 IC 是否必须具有/CS 下降沿。

此致、
Yuto Kitamura

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的团队:

    我们能不能获得关于这个主题的最新消息?  

    谢谢你。
    Yuto.

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Yuto:

    该器件确实需要至少一个 CS 下降沿才能运行和启动第一次转换。 我建议不要将其直接接地。

    此致、
    Joel