This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] AMC1336:未使用的情况

Guru**** 2390735 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1436943/amc1336-not-used-situation

器件型号:AMC1336

工具与软件:

大家好、团队成员:

客户将此器件用作电压信号检测、但有时不会使用此器件。

根据我们的数据表、该器件将会因超过共模电压而损坏、对吧? 您能在这里查看一下吗? 谢谢。

BRS、

Francis

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Francis:

    您在第8.2.4节中描述的行为在中和本身无关、只是说明输出在这种情况下无效。  

    然而、另一种要考虑的模式是输入电压由于未建立电源而超过绝对最大额定值。