This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] 【常见问题解答】DP83TC813R-Q1:DP83TC813 上电期间的复位引脚状态

Guru**** 2988540 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1659952/faq-dp83tc813r-q1-dp83tc813-reset-pin-state-during-power-up

器件型号: DP83TC813R-Q1

在 DP83TC813 的上电序列期间、RESET_N 的状态应该是多少?

DP83TC813 上电序列期间 RESET_N 的状态通常无关紧要、并且不会影响 PHY 功能。 但是、如果任何电源(不包括 VSLEEP)的斜坡速率超过 8ms、则最后一个电源稳定后需要一个复位脉冲。